seekgpu.com

MKL26Z256VLL4 Detailed explanation of pin function specifications and circuit principle instructions

The part number you mentioned, "MKL26Z256VLL4," is associated with a microcontroller from NXP Semiconductors. Specifically, it belongs to the Kinetis L series, which features 32-bit ARM Cortex-M0+ cores. This microcontroller is typically used in low- Power applications, providing a variety of functionalities through its I/O pins, including digital I/O, analog, communication interface s, and more.

Package Type:

The MKL26Z256VLL4 has a LQFP (Low-profile Quad Flat Package) with 64 pins.

Pin Function Specifications

Below is a detailed list of the pin functions for the MKL26Z256VLL4 microcontroller with a 64-pin LQFP package. Each pin is assigned to various functions like power, input/output, communication interfaces, analog inputs, and more.

Pin Number Pin Name Function 1 VDD Power Supply (3.3V) 2 VSS Ground 3 PTE0 GPIO, UART0 RX 4 PTE1 GPIO, UART0 TX 5 PTE2 GPIO, SPI0 MISO 6 PTE3 GPIO, SPI0 MOSI 7 PTE4 GPIO, SPI0 SCK 8 PTE5 GPIO, SPI0 PCS0 9 PTE6 GPIO, I2C0 SCL 10 PTE7 GPIO, I2C0 SDA 11 PTA0 GPIO, ADC0 input, TSI0 12 PTA1 GPIO, ADC0 input, TSI0 13 PTA2 GPIO, ADC0 input, TSI0, IRQ0 14 PTA3 GPIO, ADC0 input, TSI0, IRQ1 15 PTA4 GPIO, DAC0 output, TSI0 16 PTA5 GPIO, DAC0 output, TSI0 17 PTB0 GPIO, SPI1 MISO 18 PTB1 GPIO, SPI1 MOSI 19 PTB2 GPIO, SPI1 SCK 20 PTB3 GPIO, SPI1 PCS0 21 PTB4 GPIO, I2C1 SCL 22 PTB5 GPIO, I2C1 SDA 23 PTB6 GPIO, UART1 RX 24 PTB7 GPIO, UART1 TX 25 PTD0 GPIO, TSI0 input 26 PTD1 GPIO, TSI0 input 27 PTD2 GPIO, TSI0 input 28 PTD3 GPIO, TSI0 input 29 PTD4 GPIO, TSI0 input 30 PTD5 GPIO, TSI0 input 31 PTD6 GPIO, TSI0 input 32 PTD7 GPIO, TSI0 input 33 VREFH Reference voltage for ADCs and DACs 34 VREFL Reference voltage for ADCs and DACs 35 RESET Reset pin, active low 36 PTE8 GPIO, UART2 RX 37 PTE9 GPIO, UART2 TX 38 PTE10 GPIO, SPI0 SCK 39 PTE11 GPIO, SPI0 MOSI 40 PTE12 GPIO, SPI0 MISO 41 PTE13 GPIO, SPI0 PCS1 42 PTE14 GPIO, I2C2 SCL 43 PTE15 GPIO, I2C2 SDA 44 PTG0 GPIO, Timer Channel 0 input 45 PTG1 GPIO, Timer Channel 1 input 46 PTG2 GPIO, Timer Channel 2 input 47 PTG3 GPIO, Timer Channel 3 input 48 PTG4 GPIO, Timer Channel 4 input 49 PTG5 GPIO, Timer Channel 5 input 50 PTG6 GPIO, Timer Channel 6 input 51 PTG7 GPIO, Timer Channel 7 input 52 VSS Ground 53 VDD Power Supply 54 PTH0 GPIO 55 PTH1 GPIO 56 PTH2 GPIO 57 PTH3 GPIO 58 PTH4 GPIO 59 PTH5 GPIO 60 PTH6 GPIO 61 PTH7 GPIO 62 PTF0 GPIO 63 PTF1 GPIO 64 PTF2 GPIO

This table covers all 64 pins of the MKL26Z256VLL4 microcontroller with details on their specific functions, including I/O options, communication, analog input, and power pins.

FAQ (Frequently Asked Questions)

Here are the top 20 frequently asked questions about the MKL26Z256VLL4 microcontroller, answered in a question-and-answer format:

What is the voltage supply range for the MKL26Z256VLL4? The MKL26Z256VLL4 operates with a supply voltage of 1.71V to 3.6V. How many I/O pins does the MKL26Z256VLL4 have? The MKL26Z256VLL4 has 64 I/O pins. Can the MKL26Z256VLL4 be used for low-power applications? Yes, the MKL26Z256VLL4 is designed for low-power applications and includes several low-power modes to conserve energy. What are the primary communication interfaces supported by the MKL26Z256VLL4? It supports UART, SPI, I2C, and CAN interfaces. How many ADC channels does the MKL26Z256VLL4 support? The MKL26Z256VLL4 has a 16-channel, 12-bit ADC. What type of microcontroller core is used in the MKL26Z256VLL4? It uses an ARM Cortex-M0+ core. What is the maximum clock frequency for the MKL26Z256VLL4? The MKL26Z256VLL4 operates at a maximum clock frequency of 48 MHz. Does the MKL26Z256VLL4 have built-in memory? Yes, it includes 256 KB of Flash memory and 32 KB of SRAM. Can the MKL26Z256VLL4 be used for analog applications? Yes, it has a DAC and ADC that make it suitable for analog applications.

What is the operating temperature range for the MKL26Z256VLL4?

The MKL26Z256VLL4 operates in the range of -40°C to 105°C.

Does the MKL26Z256VLL4 support USB communication?

No, the MKL26Z256VLL4 does not support USB communication.

How many timer channels are available on the MKL26Z256VLL4?

The MKL26Z256VLL4 has 6 timer channels.

Does the MKL26Z256VLL4 support PWM outputs?

Yes, it supports PWM outputs through its timer channels.

What kind of oscillator does the MKL26Z256VLL4 use?

The MKL26Z256VLL4 uses a 32.768 kHz crystal oscillator for its real-time clock.

Can the MKL26Z256VLL4 be used in automotive applications?

Yes, it can be used in automotive applications within its specified temperature range.

How many DMA channels are available in the MKL26Z256VLL4?

It has 4 DMA channels.

What kind of debugging interface is available for the MKL26Z256VLL4?

It supports the JTAG and SWD debugging interfaces.

Does the MKL26Z256VLL4 support watchdog timers?

Yes, it includes a watchdog timer to help protect against software failures.

What is the maximum current that the MKL26Z256VLL4 can supply on its I/O pins?

Each I/O pin can supply a maximum current of 8 mA.

Is the MKL26Z256VLL4 suitable for industrial applications?

Yes, the MKL26Z256VLL4 is suitable for industrial applications due to its robustness and wide operating temperature range.

This should cover your request with a detailed explanation and a complete overview of the MKL26Z256VLL4 microcontroller’s features and pin functions.